How to Disassemble Your Xbox 360
Step by Step instructions with pictures.
1. Remove Xbox 360 Faceplate as shown below

2. Remove the bottom left rubber from case.

3. Follow the instruction to insert the XCM opening tool to the square hole (insert it close to the edge of the hole then turn right as pictured in figure A, and turn left as it shows in figure C)

4. Push the XCM opening tool into the base grill to take off the right heat panel.

5. Push the XCM opening tool to the base grill to take off the left heat panel.

6. Take the heat panels apart.

7. Remove Microsoft Sticker/Seal

8. Undo the 4 Buckles on the Front of the console.

9. Push the XCM opening tool into the indicated holes, press hard to let the top and bottom panels pop apart.

10. Pull apart the 2 halves of the Xbox 360 case.

11. Remove the DVD Drive eject button. (Pull out)

12. As indicated by the arrow, remove the 6 screws by using the Allen key tool provided.

13. Remove the DVD drive bezel..

14. You are Done!! (All parts shown below)

__________________

Id never do that because it my break:)

__________________

nice tutorial

__________________

yeah that's something really nice but not to many ae going to try and if they do they WILLbut yeah if I did this I would take a week makeing shur not to do anything wrong...


you should post a way to put it back together...if you can lol

__________________

lmao thx i got 2 xbox and i was hoping to fix the broken one without a disk tray :)

Very good and all, but why would you want to take it apart?

__________________

Very nice.